MOTION DETECTOR FOR WALL OR CEILING 180º KNX

• KNX PIR motion detectors with luminosity sensor.The lux level and time delay can be set with the control knobs, by using the IR remote control (EM MAN DM0) or via ETS.
• One PIR sensor and a high resolution lens can detect the smallest movement.
• The built-in light sensor measures the brightness on a continuous basis and compares it to the level preset on the control knob (or by means of the remote control EM MAN DM0 or by ETS).
• Depending on the parameterization by ETS, this detectors can work as:
  · Motion detection: depending on the movement and the daylight.
  · Twilight switch: teach-in brightness threshold for daylight-dependent switching.
  · Constant light control: with dimming telegrams.
  · Signal monitoring: motion detection without brightness sensor.
  · Brightness sensor: light sensor without motion detection.
  · Temperature sensor: sends the temperature value.
• Wall mounted.
• Detection area of 180º and maximum 10m at 2m high.
• Programation by ETS

TECHNICAL CHARACTERISTICS

Product reference	DM KNT 002
Power Supply (V)	21Vcc - 32Vcc
Consumption	9,3mA
Output channels	1
Maximum Number of Equipments	0
Detecting angle (º)	180
Mounting height (m)	2
Detecting length (m)	12
Programming by	ETS3 or later
Start up	System Mode
Maximum number of extra movement sensor	0
Minimum Time setting (seconds)	0,1
Maximum Time setting (minutes)	85
Minimum Brightness level (lux) (min)	5
Maximum Brightness level (lux) (max)	1000
Tecnology	Infrareds (PIR)
Mounting	Surface, wall or ceiling
Admits contactor	No
Zero crossing point	No
Compatible with	KNX
Minimum Working Temperature (ºC) (min)	-10
Maximum Working Temperature (ºC) (max)	45
Protection Degree	IP20, Class II