damp environment sensor

temperature sensors The sensors of the DIGITEMP series measure temperature values for to the bus is achieved with the standard KNX / EIB connectors inside the Heating, Ventilation and Air-Conditioning applications. Typical examples are housing. In addition to a constant action controller the digitemp devices air intake (fresh air) and exhaust ducts, heating supply and return water provide 2 higher and 2 lower bound thresholds, which can be used temperatures and similar, as well as temperatures in rooms and buildings, individually or as two 2-step controllers. These thresholds can trigger both in- and outside, like living quarters or storage depots. Our solutions switching actions (telegrams) on the bus. The group A threshold values comprise a damp environment sensor, contact sensor, room temperature and the setpoint value (in controller mode) can be set or modified directly via sensor, a channel or duct sensor and a pipe mounting sensor. Covering the (group) telegrams on the bus. Optionally a live check (sensor status) report wide range of -55 - +125° C, they readily capture temperature values for is transmitted cyclically during correct operation of the sensor. building control applications and can send this value on the bus. Connection